Wellfloat Delta Isolation Base (each)

When you add WELLFLOAT to your loudspeakers, you should be able to recognise a new and previously unheard beauty of sound. This experience will make you realise that it was previously masked by distortion and the true musical performance was there but hidden. No other products in this category have ever been able to demonstrate such a clear difference.

£476.00£519.00

Enquire now
Categories: Isolation

TECHNICAL FEATURES

  • Renowned “WELLFLOAT” pendulum floating technology is designed to minimize distortion by controlling unnecessary vibrations.
  • Engineering ideas developed into a new concept, based upon the WELLFLOAT-Piano and High-End rack models.
  • Multiple intended uses including under spikes or as supports for the feet of HiFi devices such as speakers and amplifiers.
  • 3 individual, internal mechanisms allow an increased maximum weight – 250kg each
  • Compact, simpler and more cost effective than previous models.

Specification (Standard Configuration)

Design : 3 x Small WELLFLOAT Mechanism inside

Material: Stainless Steel, Aluminium, Resin

Dimensions : Width 150mm, Height 36mm

Weight : 623g

Supported Load : 250kg per piece with static weight

(means 1,000kg in total with 4 Delta pieces. )

  • Devices with feet longer than 30mm with or without spikes
  • If you use Spikes, the diameter of the spikes should be more than 5mm and the length should be less than 5mm

Note :

It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts

Specification (20mm Option)

Design : 3 x Small WELLFLOAT Mechanism inside

Material: Stainless Steel, Aluminium, Resin

Dimensions : Width 150mm, Height 36mm

Weight : 768g

Supported Load : 250kg per piece with static weight (means 1,000kg in total with 4 Delta pieces. )

  • Devices with feet longer than 10mm with or without spikes
  • For Spikes, the diameter should be more than 5mm

Note :

It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts.

Specification (28mm option)

Design : 3 x Small WELLFLOAT Mechanism inside

Material: Stainless Steel, Aluminium, Resin

Dimensions : Width 150mm, Height 36mm

Weight : 829g

Supported Load : 250kg per piece with static weight

(means 1,000kg in total with 4 Delta pieces. )

  • Bottom of your Device should have “flat” surface or with feet with flat bottom
  • For your safety, Spike is not allowed to be directly installed on this product

Note :

It is strongly recommended to consult to your local shop, distributor or us with detailed diagram before purchasing to check if there’s potential conflicts

Send Us A Message
Wellfloat Delta Isolation Base (each)
Created by potrace 1.10, written by Peter Selinger 2001-2011
[]